Search

Reduces friction and wear, thus reducing oil and fuel consumption. Increases engine's running smoothness and leads to fewer malfunctions. increases smooth operation tested for the use with catalytic converters smooth engine running miscible with all commercially available motor oils miscible with all commercially available gear oils reduces oil and fuel consumption reduces wear prevents operational malfunctions minimizes friction Application In 4-stroke engines at every oil change; in 2-stroke engines add when filling the oil or fuel tank. Shake well before use! Dosage: In 4-stroke engines or the transmission: 20 ml (1 tube) is sufficient for 1 l of motor oil. For 2-stroke engines (mixture lubrication): 10 ml per 10 l of fuel mixture or for separate lubrication 20 ml for 1 l of 2-stroke oil.

Highly effective cleaning fluid. Removes troublesome deposits from inside the engine. Dissolves sludge and lacquer formers. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. This allows the clean engine and fresh oil to realize their full potential. simple to use highly economical tested for the use with catalytic converters long engine service life does not attack common sealing materials restores the engine to its original performance cleaning and care Application 80 ml (1 can) is sufficient for 0.8 – 2 l of oil. Add to warm motor oil before oil change. Then allow the engine to idle for approx. 10 minutes. With manual transmissions, press the clutch lever several times, holding it for a few seconds each time. Then change the oil and the filter.

High-performance motor oil based on synthetic technology. For optimum lubrication, highest performance and maximum protection of the engine under all operating conditions. Ensures outstanding engine cleanliness, excellent friction and minimum wear. Tested on engines with catalytic converters. For air and water-cooled 4-stroke engines with and without wet clutch. Also suitable for extreme conditions and sporty use. outstanding engine cleanliness excellent shear stability guarantees low oil consumption especially suitable for wet clutches high wear resistance tested for the use with catalytic converters optimum stability to aging optimum lubrication under all operating conditions

High-performance motor oil based on synthetic technology. Ensures maximum performance and protection of the engine under all operating conditions. Optimum lubrication, outstanding engine cleanliness, excellent friction and minimum wear are just as much taken for granted as gentle clutch engagement and disengagement and gear shifting. Tested on engines with catalytic converters. Developed for air and water-cooled 4-stroke engines exposed to normal to extreme operating conditions. For sporting applications. Suitable for engines with or without a wet clutch. outstanding engine cleanliness guarantees low oil consumption especially suitable for wet clutches high shear stability high wear resistance tested for the use with catalytic converters optimum stability to aging optimum lubrication under all operating conditions

Fully synthetic high-performance motor oil. For maximum performance and outstanding engine protection under all operating conditions. Offers perfect lubrication, outstanding engine cleanliness, excellent friction and minimum wear. Ensures smooth engagement and disengagement as well as gear shifting, which significantly increases driving pleasure. Tested for use with catalytic converters and on racing machines.

Developed for air and water-cooled 4-stroke engines exposed to normal to extreme operating conditions. Suitable for sporting applications. For engines with or without a wet clutch.

outstanding engine cleanliness
increases the lubricating effect
excellent wear protection
suitable for wet clutches
low evaporation loss
guarantees low oil consumption
tested for the use with catalytic converters
miscible with all commercially available motor oils
optimum stability to aging

Fully synthetic high-performance motor oil. For maximum performance and outstanding engine protection under all operating conditions. Offers perfect lubrication, outstanding engine cleanliness, excellent friction and minimum wear. Ensures smooth engagement and disengagement as well as gear shifting, which significantly increases driving pleasure. Tested for use with catalytic converters and on racing machines. Developed for air and water-cooled 4-stroke engines exposed to normal to extreme operating conditions. Suitable for sporting applications. For engines with or without a wet clutch. excellent wear protection guarantees low oil consumption especially suitable for wet clutches high shear stability tested for the use with catalytic converters optimum stability to aging optimum lubrication under all operating conditions

Fully-synthetic motor oil of supreme quality. Lubricates and protects the engine, optimizes the power output, minimizes wear and ensures excellent cleanliness. As the official motor oil of the Moto2 and Moto3 series, it has proven itself even under extreme conditions. Transports the performance and experience from the racetrack directly to the road. Tested on engines with catalytic converters. Ideal for air and water-cooled 4-stroke engines in both racing and road driving. For engines with or without a wet clutch. excellent wear resistance excellent shear stability guarantees low oil consumption especially suitable for wet clutches high engine cleanliness tested for the use with catalytic converters optimum stability to aging optimum lubrication under all operating conditions

High-performance motor oil based on synthetic technology. Ensures maximum performance and protection of the engine under all operating conditions. Optimum lubrication, outstanding engine cleanliness, excellent friction and minimum wear are just as much taken for granted as gentle clutch engagement and disengagement and gear shifting. Tested on engines with catalytic converters. Developed for air and water-cooled 4-stroke engines exposed to normal to extreme operating conditions. For sporting applications. Suitable for engines with or without a wet clutch. outstanding engine cleanliness guarantees low oil consumption especially suitable for wet clutches high shear stability high wear resistance tested for the use with catalytic converters optimum stability to aging optimum lubrication under all operating conditions

Fully synthetic motor oil tailored for use in air and water-cooled four-stroke motorbike engines, especially suitable for Harley Davidsons. Selected base oils and high-quality additive components ensure optimum lubrication, outstanding engine cleanliness and excellent friction in all operating conditions. Developed for a large number of Harley Davidson V-twin engines which specify a synthetic motor oil of 20W-50 viscosity. Exceptionally well-suited for use with or without a wet clutch. excellent wear resistance outstanding corrosion protection high engine cleanliness stable to ageing and stable viscosity outstanding high temperature stability

• Formulated specifically for racing & high-performance engines • Robust formulation resists viscosity loss • Proprietary friction modifier maximizes horsepower & torque • Fortified with anti-wear additives for extra protection Multi-viscosity, shear-stable synthetic race formula engineered to maximize power while providing outstanding engine protection. Heavily fortified with zinc and phosphorus additives to protect critical surfaces in extreme conditions. Proprietary friction modifier maximizes power and reduces engine temperatures. Durable additive system is excellent for racing and street engines. FIGHTS ENGINE WEAR Durable formulation resists viscosity loss due to mechanical shear to maintain a strong protective oil film. Heavily fortified with zinc and phosphorus anti-wear additives to provide additional protection against scuffing and wear in severe racing conditions. MAXIMIZES HORSEPOWER Formulated with a proprietary friction modifier to reduce energy lost to friction. Delivers maximum horsepower and cooler engine temperatures, promoting improved lap times and longer-lasting components. EXCELLENT ALL-TEMPERATURE PERFORMANCE Low pour point offers excellent startup protection and provides less drag when the oil has not reached operating temperature. Maintains superior film strength in extreme heat. Thermally stable synthetic chemistry resists the effects of intense heat common to racing engines to provide reliable protection for the duration of the race.

Removes deposits on injection nozzles and in the combustion chamber. Increases the cetane number. Eliminates engine operation problems such as knocking in idle and provides round and quiet engine running. Protects the entire fuel system from corrosion. Optimizes the emission test values. Can also be used as a preventative measure. Clean engines need less fuel and reduce emissions. For all diesel engines both with and without diesel particulate filters. Preventative during every inspection, after repairs on the fuel system or to solve problems (see application description on the pack or in the technical datasheet). Turbocharger tested. Perfectly compatible with all conventional diesel and biodiesel fuels. Can contents are sufficient for up to 75 l fuel.
Application
Preventive use:　

Add to diesel fuel according to the inspection intervals.

Problem-specific use:

Disconnect fuel feed and return lines and insert into the diesel purge. Start the engine. Run the engine at a variety of different speeds and switch off before the container is empty. Reconnect fuel lines to the fuel system and check for leaks. In cases of extreme contamination, repeat the cleaning process if necessary.

eliminates diesel knocking
increases operational reliability
boosts the cetane number
guarantees optimum combustion
good corrosion protection
highly economical
reduces deposits
cleans the fuel system

High-tech ceramic wear protection. Reduces friction and wear through ceramic compounds offering high chemical and thermal resistance. Prevents direct metal-to-metal contact, thus increasing the assembly service life. Reduces fuel consumption in gasoline and diesel engines thanks to the low-friction effect. Miscible with all commercially available motor oils and motor vehicle gear oils. For engines, manual transmissions, pumps and compressors. Is added to the respective oil. Self-mixing. Sufficient for 5 liters of oil. With a long-term effect lasting around 50,000 km. Suitable for toothed belts running in oil. Not suitable for use with wet clutches!
Application
300 ml is sufficient for up to 5 liters of motor oil. Long-term effect up to 50,000 km. Shake well before use!

excellent high and low temperature behavior
chemically inert
suitable for diesel particulate filters
increases smooth operation
stable under extreme pressures
compatible with fine filters
highest thermal stability
no deposits
long engine service life
miscible with all commercially available motor oils
reduces fuel consumption
reduces frictional losses
tested for turbochargers and catalytic converters