Search

Specially developed cleaner with selected solvent combinations for fast, easy cleaning and degreasing structural parts in the two-wheel sector. For cleaning chains with and without O/X rings on two-wheelers and quads as well as drum and disc brake systems, their brake pads and components as well as brake calipers. Application Place a box or rag under the parts to be cleaned. Spray dirty chains with Motorbike Chain and Brake Cleaner and let it run off. After the solvents have evaporated (approx. 10 min), the chain will be clean and free of grease. absolutely free of chlorine removes oil and grease-based contaminants low surface tension leaves no residues high proportion of active components controlled evaporation free of residues dissolves resin and tar-type residues optimum penetration capacity optimizes economical use

Fully synthetic, extremely adherent and waterproof chain lubricating grease. With outstanding creep and lubricating effect. Particularly suitable for fast-running chains. Reduces chain elongation and helps to extend chain service life. Full effectiveness only when used unmixed. Before use we recommend cleaning the chain with Motorbike Chain Cleaner. For initial and maintenance lubrication of power-transmission chains. Especially suitable for dusty, dirty and corrosive conditions. For high-load and fast-running chains with and without O-rings and X-rings. Application Before use we recommend cleaning the chain with Motorbike Chain Cleaner. Then spray the chain with Motorbike Chain Lube. The lubricant attains its final consistency and adherence once the solvent has evaporated. excellent penetration action excellent adhesion especially cold, hot and splash-water resistant outstanding corrosion protection highest load-carrying capacity friction and wear reducing resistant to acceleration forces reduces chain elongation

White, full synthetic special grease. For optimal lubrication through visible application on the chain. Cold, heat and spray resistant. Very good adhesion and wear protection. Reduces chain elongation and extends the service life of the chain. Good creeping properties and good corrosion protection. We recommend cleaning the chain with Motorbike Chain Cleaner before use. For all highly-stressed and high-speed motorcycle chains with and without O/X-rings. Application We recommend cleaning the chain with Motorbike Chain Cleaner before use. Spray chain with Motorbike Chain Spray until white. The lubricant attains its final consistency and adherence once the solvent has evaporated. excellent penetration action excellent adhesion especially cold, hot and splash-water resistant outstanding corrosion protection highest load-carrying capacity friction and wear reducing resistant to acceleration forces reduces chain elongation

Ready-to-use mixture based on ethylene glycol. Combination of active agents with an OAT inhibitor package specially developed for modern aluminum high-performance engines. Does not contain amines, borates, nitrites, phosphates or silicates and provides outstanding protection against frost, rust and overheating. Ensures vehicle operation all year round. Used for all cooling systems and engines, particularly aluminum high-performance engines, in passenger cars, commercial vehicles, motorcycles, buses, agricultural machines as well as stationary engines and equipment that require cooling system protection of this quality. Particularly suitable for engines of the latest generation. Application Clean the cooling system with Radiator Cleaner. Then drain it, flush it thoroughly with water and fill with ready-to-use Coolant Ready Mix RAF. excellent cleaning effect excellent corrosion protection ready for use outstanding for aluminum high-performance engines provides outstanding protection against overheating prevents the cooling system from freezing up prevents operational malfunctions contains no amines, borates, nitrites, phosphates or silicates

Full synthetic fork oil and shock-absorber oil. Reduces shear losses and provides sure handling performance even after long use. Prevents foam formation and seal hardening. Good corrosion and wear protection provide long service life. good corrosion protection high wear resistance prevents seals from swelling prevents foam formation better drivability

Full synthetic fork oil and shock-absorber oil. Reduces shear losses and provides sure handling performance even after long use. Prevents foam formation and seal hardening. Good corrosion and wear protection provide long service life. lasting corrosion protection increases driving safety high wear resistance prevents seals from swelling prevents foam formation

AMSOIL Brake & Parts Cleaner (BPC) quickly removes oil, grease, brake fluid and other contaminants from brake parts and other automotive components. It cleans brake parts with no major disassembly and leaves no residue, helping eliminate brake squeal and chatter. Performance Features Quickly removes grease and oil Leaves no residue Dries quickly Chlorinated, non-flammable formula VOC-free APPLICATIONS – Brake Parts – Brake Pads – Calipers – Drums and More

Increases octane up to three numbers for maximum power and efficiency. Designed to improve startup performance and eliminate engine ping or knock for increased power during low-rpm operation. Contains detergents that help combustion chambers and fuel-delivery systems maintain cleanliness for optimum performance. At recommended treat rate, does not harm catalytic converters or oxygen sensors.

Product Description

Motorex brings you the Ethanol Treatment – 250ml. This is a biochemical fuel improver, which improves the properties of all 2-stroke and 4-stroke fuels (e.g. E10 – E85) blended with ethanol. This fuel additive reduces ethanol and fuel separation, optimizes combustion, improves fuel efficiency and reduces corrosion. It ensures that the engine runs more easily, removes deposits in the combustion chamber, regenerates old fuel and helps to remove water from the system.

Highlights

Biochemical formula that improves the properties of ethanol-blended fuel in 2-stroke and 4-stroke engines
Ensures the engine runs more smoothly
Reduces phase separation/separation
Removes deposits in the combustion chamber
Regenerates old fuel
Assists with the removal of water from the system
Tested and found suitable for use in catalytic converters

Field of application

It is suitable for all two-stroke and four-stroke engines that are operated with fuel that has been mixed with ethanol (e.g. E10 or E85). In addition, it has been tested and found suitable for use in catalytic converters. For petrol only.

Application

Self-mixing; only add to fuel.

Dosage

Shock dosage 10 ml : 10 litres
Prevention dosage 10 ml : 20 litres

Product Specifications

Form: Fluid
Color: Light Blue
Quantity: 250 ml

 

Unique agent for cooling systems that doubles the wetting ability of water Rust and corrosion protection allows for use of straight water in racing or reduced antifreeze levels in warm climates Improves heat transfer and reduces cylinder head temperature Use one bottle for most passenger cars and light trucks, treats 3 to 5 gallons or 13.2 to 15.9 liters, vehicles with larger cooling systems should use two bottles, small cooling systems should use 1oz (3 to 4 capfuls) per quart Compatible with new or used antifreeze (including DEX-COOL® and long-life versions) to improve the heat transfer of ethylene and propylene glycol systems Satisfies ASTM D2570 and ASTM D1384 corrosion tests for glycol-based antifreezes Contains no ethylene glycol

AMSOIL P.i. is the most potent gasoline additive available today. As a concentrated detergent, it is unsurpassed in cleaning combustion chamber deposits, intake valve deposits and port fuel injector deposits. AMSOIL P.i. helps maintain peak engine efficiency, fuel economy, power and drivability in newer low mileage engines. In engines with accumulated deposits, testing showed AMSOIL P.i. provided the following clean-up benefits after only one tank of gasoline: * Improves fuel mileage an average of 2.3% and up to 5.7% * Reduces emissions --hydrocarbons (HC) up to 15% --carbon monoxide (CO) up to 26% --nitrous oxides (NOx) up to 17% * Restores power and performance * Reduces the need for costly higher octane fuel * Reduces noise from carbon rap and pre-ignition Recommendations: Treat one full tank of gas up to 20 gallons with one bottle of P.i. For very large gas tanks, partially fill to 40 gallons and treat with two bottles of P.i. Using more than two bottles per treatment is not recommended. Treat gas every 4,000 miles of service (or 100 hours for marine, stationary and off-road gasoline-powered engines). P.i. helps pass emission tests by running one tank of treated fuel through the engine prior to testing. Safe for use with catalytic converters, oxygen sensors, oxygenated gas and 10 percent ethanol blended gas. Not recommended for two-cycle engines.

• Increases octane up to 4 numbers for improved performance • Maximizes power • Reduces engine knock • Improves ignition & responsiveness • Helps fuel burn more cleanly • Removes carbon deposits For off-road and racing use only. Increases octane up to four numbers. Helps reduce engine knock for maximum power, responsiveness and performance. INCREASES OCTANE UP TO 4 NUMBERS Significantly increases engine response and power in two- and four-stroke gasoline-fueled engines. Just one treatment reduces engine knock, improves ignition and helps fuel burn cleaner. Most users find one 12-ounce (354 mL) bottle for 15 gallons (57 litres) of gasoline provides the ideal performance increase. EXCELLENT LEAD SUBSTITUTE Excellent as a lead substitute in collector automobiles, older off-road equipment and pleasure vehicles.

• High viscosity index helps prevent fade under extreme temperatures • Consistent, smooth dampening • Seal conditioners for extended service life • Race-grade technology Developed for those who demand top performance from their suspension systems. Ideal for circle-track racing applications, cars, trucks, snowmobiles, ATVs, UTVs and motorcycles. To cross-reference against your current product, visit AMSOIL.com/shockfluidcrossreference. CONTROLS DAMPENING & REBOUNDS Formulated to make suspension systems more predictable. High-viscosity-index base oils effectively maintain viscosity for maximum performance. Anti-foam agents reduce aeration and foam to promote predictable suspension feel. REDUCES FRICTION & WEAR Contains friction modifiers to reduce energy loss due to friction for optimum efficiency. Formulated with anti-wear agents that protect shocks and forks from premature wear for long life.

• Formulated specifically for racing & high-performance engines • Robust formulation resists viscosity loss • Proprietary friction modifier maximizes horsepower & torque • Fortified with anti-wear additives for extra protection Multi-viscosity, shear-stable synthetic race formula engineered to maximize power while providing outstanding engine protection. Heavily fortified with zinc and phosphorus additives to protect critical surfaces in extreme conditions. Proprietary friction modifier maximizes power and reduces engine temperatures. Durable additive system is excellent for racing and street engines. FIGHTS ENGINE WEAR Durable formulation resists viscosity loss due to mechanical shear to maintain a strong protective oil film. Heavily fortified with zinc and phosphorus anti-wear additives to provide additional protection against scuffing and wear in severe racing conditions. MAXIMIZES HORSEPOWER Formulated with a proprietary friction modifier to reduce energy lost to friction. Delivers maximum horsepower and cooler engine temperatures, promoting improved lap times and longer-lasting components. EXCELLENT ALL-TEMPERATURE PERFORMANCE Low pour point offers excellent startup protection and provides less drag when the oil has not reached operating temperature. Maintains superior film strength in extreme heat. Thermally stable synthetic chemistry resists the effects of intense heat common to racing engines to provide reliable protection for the duration of the race.

High-tech ceramic wear protection. Reduces friction and wear through ceramic compounds offering high chemical and thermal resistance. Prevents direct metal-to-metal contact, thus increasing the assembly service life. Reduces fuel consumption in gasoline and diesel engines thanks to the low-friction effect. Miscible with all commercially available motor oils and motor vehicle gear oils. For engines, manual transmissions, pumps and compressors. Is added to the respective oil. Self-mixing. Sufficient for 5 liters of oil. With a long-term effect lasting around 50,000 km. Suitable for toothed belts running in oil. Not suitable for use with wet clutches!
Application
300 ml is sufficient for up to 5 liters of motor oil. Long-term effect up to 50,000 km. Shake well before use!

excellent high and low temperature behavior
chemically inert
suitable for diesel particulate filters
increases smooth operation
stable under extreme pressures
compatible with fine filters
highest thermal stability
no deposits
long engine service life
miscible with all commercially available motor oils
reduces fuel consumption
reduces frictional losses
tested for turbochargers and catalytic converters