Search

Increases octane up to three numbers for maximum power and efficiency. Designed to improve startup performance and eliminate engine ping or knock for increased power during low-rpm operation. Contains detergents that help combustion chambers and fuel-delivery systems maintain cleanliness for optimum performance. At recommended treat rate, does not harm catalytic converters or oxygen sensors.

Product Description

Motorex brings you the Ethanol Treatment – 250ml. This is a biochemical fuel improver, which improves the properties of all 2-stroke and 4-stroke fuels (e.g. E10 – E85) blended with ethanol. This fuel additive reduces ethanol and fuel separation, optimizes combustion, improves fuel efficiency and reduces corrosion. It ensures that the engine runs more easily, removes deposits in the combustion chamber, regenerates old fuel and helps to remove water from the system.

Highlights

Biochemical formula that improves the properties of ethanol-blended fuel in 2-stroke and 4-stroke engines
Ensures the engine runs more smoothly
Reduces phase separation/separation
Removes deposits in the combustion chamber
Regenerates old fuel
Assists with the removal of water from the system
Tested and found suitable for use in catalytic converters

Field of application

It is suitable for all two-stroke and four-stroke engines that are operated with fuel that has been mixed with ethanol (e.g. E10 or E85). In addition, it has been tested and found suitable for use in catalytic converters. For petrol only.

Application

Self-mixing; only add to fuel.

Dosage

Shock dosage 10 ml : 10 litres
Prevention dosage 10 ml : 20 litres

Product Specifications

Form: Fluid
Color: Light Blue
Quantity: 250 ml

 

Unique agent for cooling systems that doubles the wetting ability of water Rust and corrosion protection allows for use of straight water in racing or reduced antifreeze levels in warm climates Improves heat transfer and reduces cylinder head temperature Use one bottle for most passenger cars and light trucks, treats 3 to 5 gallons or 13.2 to 15.9 liters, vehicles with larger cooling systems should use two bottles, small cooling systems should use 1oz (3 to 4 capfuls) per quart Compatible with new or used antifreeze (including DEX-COOL® and long-life versions) to improve the heat transfer of ethylene and propylene glycol systems Satisfies ASTM D2570 and ASTM D1384 corrosion tests for glycol-based antifreezes Contains no ethylene glycol

AMSOIL P.i. is the most potent gasoline additive available today. As a concentrated detergent, it is unsurpassed in cleaning combustion chamber deposits, intake valve deposits and port fuel injector deposits. AMSOIL P.i. helps maintain peak engine efficiency, fuel economy, power and drivability in newer low mileage engines. In engines with accumulated deposits, testing showed AMSOIL P.i. provided the following clean-up benefits after only one tank of gasoline: * Improves fuel mileage an average of 2.3% and up to 5.7% * Reduces emissions --hydrocarbons (HC) up to 15% --carbon monoxide (CO) up to 26% --nitrous oxides (NOx) up to 17% * Restores power and performance * Reduces the need for costly higher octane fuel * Reduces noise from carbon rap and pre-ignition Recommendations: Treat one full tank of gas up to 20 gallons with one bottle of P.i. For very large gas tanks, partially fill to 40 gallons and treat with two bottles of P.i. Using more than two bottles per treatment is not recommended. Treat gas every 4,000 miles of service (or 100 hours for marine, stationary and off-road gasoline-powered engines). P.i. helps pass emission tests by running one tank of treated fuel through the engine prior to testing. Safe for use with catalytic converters, oxygen sensors, oxygenated gas and 10 percent ethanol blended gas. Not recommended for two-cycle engines.

• Increases octane up to 4 numbers for improved performance • Maximizes power • Reduces engine knock • Improves ignition & responsiveness • Helps fuel burn more cleanly • Removes carbon deposits For off-road and racing use only. Increases octane up to four numbers. Helps reduce engine knock for maximum power, responsiveness and performance. INCREASES OCTANE UP TO 4 NUMBERS Significantly increases engine response and power in two- and four-stroke gasoline-fueled engines. Just one treatment reduces engine knock, improves ignition and helps fuel burn cleaner. Most users find one 12-ounce (354 mL) bottle for 15 gallons (57 litres) of gasoline provides the ideal performance increase. EXCELLENT LEAD SUBSTITUTE Excellent as a lead substitute in collector automobiles, older off-road equipment and pleasure vehicles.

High-tech ceramic wear protection. Reduces friction and wear through ceramic compounds offering high chemical and thermal resistance. Prevents direct metal-to-metal contact, thus increasing the assembly service life. Reduces fuel consumption in gasoline and diesel engines thanks to the low-friction effect. Miscible with all commercially available motor oils and motor vehicle gear oils. For engines, manual transmissions, pumps and compressors. Is added to the respective oil. Self-mixing. Sufficient for 5 liters of oil. With a long-term effect lasting around 50,000 km. Suitable for toothed belts running in oil. Not suitable for use with wet clutches!
Application
300 ml is sufficient for up to 5 liters of motor oil. Long-term effect up to 50,000 km. Shake well before use!

excellent high and low temperature behavior
chemically inert
suitable for diesel particulate filters
increases smooth operation
stable under extreme pressures
compatible with fine filters
highest thermal stability
no deposits
long engine service life
miscible with all commercially available motor oils
reduces fuel consumption
reduces frictional losses
tested for turbochargers and catalytic converters